Share 'ArduEye Rox1 board: Soldering the 5-pin header to the board (for Tam chips)'
If your ArduEye Rox1 board has a Tam chip, then you will need five connections between the board and your Arduino. You will need the 5-pin header that came with the ArduEye board and a soldering iron.
INSTRUCTIONS FOR FULL-SIZED ARDUINO
Break the 5-pin header into three sections, two 2-header pieces and one single-header piece.
Put the three header pieces into the Arduino boar…
You can share this discussion in two ways…
Share this link:
Send it with your computer's email program: Email this