Embedded Eye

Give your gizmo the gift of sight

Due to my need to develop some form of eyegaze mouse we have been (wife & I) using ardueye as an embedded first stage.  Here is where we have got so far.

1) Hooked up camera at close to correct focal lenght to eye

2) Established that the eye will track left and right and display in some form that we can use.

3) Worked out the drift in the system focusing on the eyeball (similar to a gyro drift).

We have success in the above three.

By just tracking one axis and not using accumulation we could work out the drift so the next step is to get a mega and repeat for two axis and either use the servo out, in arduino or send serial commands to a teensy board which has usb mouse routines on it.

Views: 2134

Comment by Clinton McKinnon on April 21, 2013 at 9:28pm

Trying ski goggles as mount for camera should also allow us to do different light experiements for stabilization

Comment by Clinton McKinnon on May 14, 2013 at 9:18pm

got our thermal sensor (omron 16 pixel) and run the test arduino and processing program.  Looks as thou it's gonna work overlaying with the stonyman chip as a dynamic reference and the omron as the absolute reference.

Comment

You need to be a member of Embedded Eye to add comments!

Join Embedded Eye

© 2022   Created by Geoffrey L. Barrows.   Powered by

Badges  |  Report an Issue  |  Terms of Service